Introduction to Japanese Swords

Storing and Caring for Japanese Swords | What Beginners Should Avoid

When you keep a Japanese sword at home for the first time, the first things you are unsure about are where to put it and where to draw the line on how far you may handle it yourself. Working on it in an attempt to improve it may end up damaging the blade or the mountings.

This article does not go into procedures such as drawing the blade, polishing, disassembly, or treating rust. Instead, it sorts out where to keep the sword in the home, what can be checked from the outside while the sword remains in its scabbard, and the signs that you should seek advice rather than touch it yourself. Because the condition of an individual sword cannot be judged without seeing the actual piece, please check any points you are unsure about with the seller or a specialist.

Check what you have on hand before storing

The first thing to look at is not the blade but what accompanies it. For the Firearms and Swords Registration Certificate, first establish whether you have it and where it is kept, and sort out which sword the document belongs to. There is no need to draw the blade or disassemble the mountings in order to check. Comparing the sword against the entries on the document should be done with the seller or a specialist in a safe setting.

The Society for Preservation of Japanese Art Swords FAQ recommends storing the sword and registration certificate separately as a theft precaution (Japanese Sword Museum: Frequently Asked Questions). Registration and ownership procedures are outside this article's scope; see Checks before Purchase or Inheritance Consultations and Procedures.

Next examine the exterior: is the blade in a shirasaya or a koshirae mounting? The craftsmanship of mountings is discussed in Mountings and Sword Fittings.

Also check whether a bag is included. The Japanese Sword Museum advises keeping both shirasaya and koshirae in bags (Japanese Sword Museum: Handling and Preservation). If a bag is torn or damp, or its cord is broken, explain the condition to the seller or a specialist rather than replacing or repairing it on your own initiative.

Where to keep the sword, and what you can check yourself

What to avoid in a storage location is humidity. For preserving the blade, the Japanese Sword Museum lists avoiding humidity and laying the sword horizontally, because oil collects at the bottom if the sword is stood upright. It also says that camphor and naphthalene should be avoided because they cause rust. On the other hand, koshirae differ from the blade in that excessive dryness is also considered undesirable, and because a sword stored for a long period in old koshirae is prone to rust, the approach of using a shirasaya as a resting scabbard (yasume-saya) is presented.

What a beginner checks personally is limited to the areas visible from the outside while the sword remains in its scabbard. For inspection and care of the blade, please consult the seller or a specialist according to the sword's condition. Avoid testing strength or fit by touch, and avoid drawing the blade or disassembling the sword in order to take photographs.

Where to look What can be checked from the outside What to do when you notice something
Storage location Whether there is dampness or condensation, and whether the sword is laid horizontally Reconsider any location with dampness or condensation. Do not place camphor or naphthalene there
Exterior of the bag Tears, soiling, dampness Do not go ahead with replacement or repair yourself; describe the condition and consult
Outside of the scabbard Cracks, stains, soiling Do not test strength or fit by touch; note the condition and consult
Documents Whether there is a registration certificate, where it is kept, and which sword the document belongs to If you cannot find it, consult the relevant office

Care conditions such as the amount of oil and the frequency of care vary with the sword's condition, so do not rely on uniform figures; please consult the seller or a specialist in charge. Nor does being housed in a shirasaya mean that no care is needed.

Signs that you should consult rather than treat it yourself

The following conditions are occasions to consult before moving on to any work. There is no need to draw the blade to check for rust or fit.

  • Rust is already visible on the blade. The Japanese Sword Museum states that rust should not be scraped off by self-taught methods and that a sword polisher (togishi) should be consulted.
  • The sword feels hard to draw from the scabbard, or the fit feels loose. Please consult without testing it repeatedly.
  • The tsuka (hilt) or tsuba (guard) feels loose. Do not retighten or disassemble it.
  • The scabbard has cracks or stains.
  • The place where it was stored was damp, or it was left in place for a long time.

For an approach to rust itself, see Consulting about Rust.

What to convey when you consult

Even before having the actual piece examined, writing down the following points lets you proceed with the discussion after sorting out what accompanies the sword and its storage conditions.

  • Shirasaya or koshirae, and whether there is a bag
  • Where it was kept, and whether it was laid horizontally or stood upright
  • Whether insect repellent was used
  • Changes you noticed, and when you noticed them
  • Whether there is a registration certificate, and where it is kept
  • What you have done yourself so far, and what you have not

For photographs to accompany an inquiry, see Taking Photos for a Consultation. For a sword you own, use Photo Consultations for Owned Swords; for a sword you are considering purchasing, use Purchase Consultations.

Sources

  • The Japanese Sword Museum, “Handling and Preservation Methods” https://www.touken.or.jp/museum/sword/preservation.html
  • The Japanese Sword Museum, “Frequently Asked Questions” https://www.touken.or.jp/museum/faq/
— Consultation —

Consult us about a sword you own

Consultations about appraisal, valuation, buying and selling are free and available by appointment only.

The consultation process → inquiry form
Back to articles